120mm Chuck Standard Laser Tube Cutting Machine (6m)
Used for various intersecting line cross-section cutting and drilling of 10-120mm round pipes and square pipes
$10,599-11,799 / set
- 4-axis linkage for complex intersecting line machining
- 6-meter long pipe formed in one pass
- Precision rack and pinion + servo motor + dual linear guides
- No programming required, built-in graphics library
- High cost-effectiveness
Detailed Introduction
The QT-6012MY adopts a four-axis linkage structure, with a chuck through-capacity of 120mm, an effective pipe cutting length of 6000mm, and supports intersecting line cutting and drilling for round pipes of 15-120mm and square or rectangular pipes of 15-120mm. The equipment is equipped with front and rear pneumatic chucks, the front chuck can perform over-travel cutting, and the tailing length is controlled at 50mm. The transmission part uses precision gear racks, servo motors, and double-sided linear guide rails. The square pipe cutting speed is 0-7000mm/min, the round pipe cutting speed is 0-8000mm/min, the cutting accuracy error is ±0.5mm, and the reset accuracy is ±0.05mm. The system comes with a built-in graphics library and programming-free operation. The standard configuration includes a Raycus laser 15H, an Ospri or Jiaqiang laser cutting head, a S&A chiller, a Chaokong CNC system, Schneider relays, and Hechuan servo motors. It supports customization of laser power, configuration, and pipe processing length, and is suitable for small and medium-sized pipe processing factories to use as a main machine model.
- Four-axis linkage structure, capable of completing round pipe, square pipe, and various intersecting line cross-section cutting and drilling, suitable for scenarios with complex pipe fitting processing needs
- Effective processing length of 6 meters, long pipes can be formed in one clamping, reducing errors and labor caused by multiple loading and unloading
- Front and rear pneumatic chuck configuration, the front chuck can perform over-travel cutting, tailing length 50mm, which helps control pipe waste
- The system comes with a built-in graphics library and programming-free operation, reducing the requirements for operators' programming ability
- The standard configuration uses Raycus laser, Ospri/Jiaqiang cutting head, S&A chiller, Schneider relays, and Hechuan servo motors
- Supports customization of laser power, configuration, and pipe processing length, and specific solutions can be confirmed according to actual processing needs
| Product Name | 120mm Chuck Standard Laser Tube Cutting Machine (6 m) |
| Product Categories | Laser Tube Cutting Machine |
| Effective Cutting Diameter | Round pipe 15-120mm ; square pipe or rectangular pipe 15-120 mm |
| Cutting Thickness | ≤3mm (determined by material, laser power size) |
| Effective Cutting Length | 6000 mm |
| Cutting Accuracy Tolerance | ±0.5 mm |
| Cutting Speed | Square tube 0-7000mm/min; round tube 0-8000mm/min |
| Return Accuracy | ±0.05 mm |
Applications
- Metal furniture factories processing chair legs, table frames and other round tube and square tube connectors, requiring intersecting line cross-section cutting and drilling
- Sports equipment factories producing fitness equipment tube parts, involving multi-angle tube cutting and hole position processing
- Auto parts enterprises processing exhaust pipes and structural tube parts, with requirements for cutting precision and consistency
- Tube processing enterprises undertaking intersecting line cutting and drilling orders for round tubes, square tubes, and rectangular tubes
- Small and medium-sized tube processing factories need a mainstay tube cutting equipment that balances 6-meter tube length processing capability and procurement cost
Product Overview
The 120mm chuck standard laser tube cutting machine (6 meters) is the Qingtian QT-6012MY four-axis linkage laser tube cutting machine, with a chuck through capacity of 120mm and an effective processing length of 6 meters. The equipment is mainly used for intersecting line cross-section cutting and drilling of round tubes, square tubes, and rectangular tubes, suitable for tube processing enterprises, metal furniture factories, sports equipment factories, and auto parts enterprises. The whole machine adopts rack and pinion transmission, square rail guidance, and servo motor drive, with front and rear pneumatic chucks, the front chuck can perform over-position cutting, and the tailing length is 50mm. The system comes with a built-in graphics library and programming-free operation. Standard configuration includes Raycus laser 15H, Ospri or Jiaqiang laser cutting head, Teyu chiller, Chaokong CNC system, Schneider relays, and Hechuan servo motors.
Key Selling Points
The four-axis linkage structure enables this machine to complete cutting and drilling of round pipes, square pipes, and various intersecting-line cross-sections, making it suitable for occasions where pipe joint connections require multi-angle processing. The 6-meter effective processing length supports one-time clamping and forming of long pipes, reducing repeated loading and unloading. The front and rear pneumatic chucks, combined with the front chuck out-of-position cutting function, control the tailing length to 50mm, helping to reduce pipe material waste. The system comes with a built-in graphics library, so operators do not need to program from scratch, reducing the dependence on programming ability. The transmission part adopts precision gear rack, servo motors, and dual-side linear guides. The square pipe cutting speed is 0-7000mm/min, the round pipe cutting speed is 0-8000mm/min, the cutting accuracy error is ±0.5mm, and the reset accuracy is ±0.05mm. The standard configuration uses Raycus laser, Ospri/Jiaqiang cutting head, Teyu chiller, Schneider relays, and Hechuan servo motors, with clear brands for core components.
Applications
This machine is mainly aimed at small and medium-sized pipe processing plants, metal furniture factories, sports equipment factories, and auto parts enterprises. Typical processing scenarios include: cutting round pipe and square pipe connectors such as chair legs and table frames for metal furniture; multi-angle cutting and drilling of pipe fittings for sports equipment; processing of automotive exhaust pipes and structural pipe fittings; and intersecting-line cutting orders for round pipes, square pipes, and rectangular pipes undertaken by pipe processing enterprises. It is suitable for pipe processing needs with pipe diameter of 15-120mm, pipe length within 6 meters, and cutting thickness below 3mm. If the processing object exceeds this range, or if higher power or longer processing length is required, you can contact us to confirm a customized solution.
Specifications
Effective cutting pipe diameter: round pipe 15-120mm, square pipe or rectangular pipe 15-120mm. Effective cutting pipe length: 6000mm. Cutting thickness: ≤3mm, specifically determined by the material and laser power. Cutting accuracy error: ±0.5mm. Reset accuracy: ±0.05mm. Cutting speed: square pipe 0-7000mm/min, round pipe 0-8000mm/min. Equipment dimensions: 7500mm*800mm*1100mm, subject to the actual product. Power supply voltage: 220V. Air source: compressed air, requiring oil-free, water-free, and impurity-free. Drive mode: gear rack transmission. Guide rail: square rail. Chuck device: front and rear pneumatic chucks, the front chuck can perform out-of-position cutting. Loading method: manual loading, automatic feeding and cutting. Tailing length: 50mm. Standard configuration: Raycus laser 15H, Ospri/Jiaqiang laser cutting head (shipped randomly, not specified), Teyu chiller, Chaokong CNC system, Schneider relays, Hechuan servo motors. For equipment weight, packaging instructions, delivery time, and certification information, please contact us to confirm.
Purchasing & Delivery
The minimum order quantity is 1 set, and the price range is $10,599-11,799 / set. Customization of laser power, configuration, and pipe processing length is supported. For specific configuration plans and quotations, please contact us to confirm. Packaging instructions and delivery time can currently be further confirmed according to your project needs. You are welcome to provide the material, pipe diameter, wall thickness, pipe length, and estimated purchase quantity of the pipes to be processed, and we will assist in confirming the appropriate configuration and delivery arrangements.
Service & Support
We provide a one-year free warranty, as well as installation, commissioning, and operation training. After the equipment arrives, we will arrange personnel to assist with installation and commissioning and train operators to help the equipment be put into production as soon as possible. Regarding questions such as laser service life, daily maintenance costs, and spare parts replacement, you are welcome to contact us for specific information. If you need to confirm during the selection stage whether the equipment is suitable for your pipe processing needs, you can also provide processing samples or detailed parameters, and we will assist in making a judgment.
FAQ
What pipe materials can this laser pipe cutting machine process?
QT-6012MY supports intersecting-line cross-section cutting and drilling for round pipes of 15-120mm and square pipes or rectangular pipes of 15-120mm, with an effective processing length of 6 meters and a cutting thickness of ≤3mm, specifically determined by the material and laser power. If your pipe specifications exceed this range, you can contact us to confirm a customized solution.
Is customization of laser power and configuration supported?
Yes. We can confirm the appropriate laser power, configuration, and pipe processing length based on your processing material, pipe diameter, wall thickness, and efficiency requirements. You are welcome to provide your specific processing needs, and we will assist in confirming the configuration plan and quotation.
Do you provide installation, commissioning, and operation training?
Yes. We provide a one-year free warranty and arrange installation, commissioning, and operation training to help operators become familiar with equipment operation and daily maintenance. Specific arrangements can be confirmed by contacting us.
What is the remnant length of this equipment?
The remnant length is 50mm. The equipment uses front and rear pneumatic chucks, and the front chuck can perform over-travel cutting, which helps reduce pipe waste.
How can packaging, delivery time, and certification information be confirmed?
Packaging instructions, delivery time, and certification information can be further confirmed according to your project requirements. You are welcome to contact us and provide your processing needs and purchase quantity, and we will assist in confirming the relevant arrangements.
Submit Inquiry
Please fill in the information below, and we will contact you as soon as possible and provide a product solution or quote based on your needs.
